iOS 4.3.5 Tethered iPhone, iPad, iPod touch Jailbreak / Boot Using Redsn0w [Tutorial]

Ads

Lota Man on July 26, 2024

A few hours back, Apple released iOS 4.3.5 for iPhone, iPad and iPod touch. We mentioned that devices susceptible to the Limera1n bootrom exploit will be able to be jailbroken on iOS 4.3.5. Following is the guide on how to jailbreak iOS 4.3.5 on iPhone, iPad and iPod touch using redsn0w.

Prominent member of the iPhone Dev Team, MuscleNerd has also confirmed that it is indeed possible to jailbreak iOS 4.3.5. It is going to be a tethered jailbreak, meaning that whenever it is required for you to reboot your device, it has to been connected to the computer for a tethered boot. Otherwise, it will just get stuck on the Apple logo and won't boot up until and unless you boot tethered using a computer and the very same redsn0w software you used to jailbreak it. So the files that you download for the jailbreak are to be kept safe as those very same files, the iOS 4.3.5 ipsw and redsn0w for your Windows or Mac machine, will also be used to boot tethered. Keep in mind that this procedure does not work on the iPad 2.

A word of advice for our friends who rely on a software unlock for their iPhones. You must not, we repeat, must not upgrade to iOS 4.3.5 or even iOS 4.3.4 for that matter. Your baseband will be upgraded and you shall not be able to use cellular services on iOS 4.3.5. Stay away from stock firmware.

Jailbreak iOS 4.3.5 Tethered on iPhone, iPad and iPod touch:

Step 1: Download both iOS 4.3.4 and iOS 4.3.5 ipsw for your iDevice. You will need the iOS 4.3.4 ipsw.

Step 2: Download the latest public version of iTunes, followed by downloading the recently released redsn0w 0.9.8 beta 4 for both Windows and Mac.

Step 3: Extract the redsn0w folder. Launch redsn0w on your computer. If you are running Windows 7 or Vista, make sure to do the following procedure before you run redsn0w.

Right click on redsn0w.exe and click on Properties
Go to the Compatibility tab
Check Run this program in compatibility mode for and select Windows XP Service Pack 3 from the drop down menu
Check Run this program as an administrator down in the Privilege Level.
Click Apply followed by Ok

Step 4: Once redsn0w loads up. Browse for the iOS 4.3.4 ipsw that you previously downloaded. Yes, to jailbreak iOS 4.3.5, you need to point redsn0w to iOS 4.3.4 ipsw.

Step 5: Redsn0w now begins to identify the ipsw. Once done, it takes you to a screen where you have several boxes to check. First and foremost, check Install Cydia. You may also choose to enable Battery Percentage and Multitasking Gestures.

Step 6: Upon clicking next, redsn0w now instructs you to power off your device and connect it to the computer. From here when you click next, it will show instructions on how to put your device in DFU mode. Follow these instructions carefully:

Press and hold the Power button for around three seconds
Press and hold both the Power and Home buttons for up to 10 seconds
Release Power button but keep on holding Home button until redsn0w starts injecting the Limera1n bootrom exploit.

Step 7: Once the device is in DFU mode, leave it up to redsn0w to work its magic. Sit back and watch redsn0w jailbreak iOS 4.3.5 on your iPhone, iPad and iPod touch.

Boot iOS 4.3.5 tethered after jailbreak:

Step 1: So once you have successfully done the jailbreak, you need to boot your freshly jailbroken device tethered. Connect it to your computer and power it off.

Step 2: Launch redsn0w once again and select the iOS 4.3.4 ipsw.

Step 3: Uncheck Install Cydia and any other options you may have previously checked. Now only check Just boot tethered right now.

Step 4: Follow the above mentioned instructions to put your device in DFU mode.

Step 5: If the instructions have been followed as they are meant to be, you'll see redsn0w starts to work on its on again. At this moment, your device shall be displaying a pineapple in place of the Apple logo that appears at start up. Within 2 minutes, your device will be fully booted, tethered on jailbroken iOS 4.3.5.

Downloads:

Download iOS 4.3.5 for iPhone, iPad and iPod touch

Download iOS 4.3.4 for iPhone, iPad and iPod touch

Download redsn0w 0.9.8b4 for Windows and Mac

Download iTunes 10.4 for Windows and Mac

Lucytok

after update 4.3.5 fireware and jailbreak then go cydia install some apps,
they ask for reboot device but cannot on the iphone they still at apple logo

Gleford_manalo

Restore in itunes then repeat the jailbreak

ACE

4.3.5] and when i open up redsn0w and look for the ipsw file it only recognizes the 4.2.1 ipsw file =/

Just_skual

Completed but, if tune off your device, iPhone can’t start up ;(

Buck_master30

Did the restore and remain real fix this?
Buck_master30

Did the restore and remain real fix this?
Lexsmama

Are you ever able to reboot untethered after it is jail broken?

http://www.iphoneism.com Lota Man

No, only tethered boot.

Gogz

It is going to be a tethered jailbreak, meaning that whenever it is required for you to reboot your device, it has to been connected to the computer for a tethered boot. Otherwise, it will just get stuck on the Apple logo and won’t boot up until and unless you boot tethered using a computer and the very same redsn0w software you used to jailbreak it…

And again “meaning that whenever it is required for you to reboot your device, it has to been connected to the computer”
Nguoidaukho1314

i would like to keep 4.3.3 version, but then i had to update to new version 4.3.5 for apple to fix my iPhone. And when they fix it, i have to stuck with tethered 4.3.5 version. unkool.

AC

chances are you’ll be stuck there till iOS 5 …
http://www.iphoneism.com Lota Man

Do you have saved iOS 4.3.3 SHSH blobs?

fahad azhar

yes i have

Martinezarthur36

I did as it said with my gsm iphone 4 but its stuck on apple logo and wont turn off… any thoughts?

http://www.iphoneism.com Lota Man

boot tethered.
D1gn1ty

boot tethered now on redsnow. when it says you should turn off you iphone ignore it and click next then follow the dfu mode instruccion(advice;;; hold power and home button untill the phone switches on then leave power button untill redsnow recognizes it.

Ageckles

wow thank god i dont update my ipod anymore. i left it on the 4.2.1
Boudy3001

now i updated my iphone to 4.3.5 without 4.3.4 so will it work ?

fahad azhar

no,
u need to update 4.3.4 bcoz there is no jailbreak for 4.3.5
http://www.iphoneism.com Lota Man

Yes.

Darren Hamilton25

Hey when i tried to boot the 4.3.5 version on redsn0w it say unrecognized ipsw could anyone explain?thanks

fahad azhar

hey tell me what is your ios version

Darren Hamilton25

4.3.5
Darren Hamilton25

4.3.5

Chuck Norris

You open the 4.3.4 ipsw through redsn0w, even though you are running 4.3.5.
Trust me, it works. The exploit for 4.3.5 is identical to that of 4.3.4 so you can jailbreak 4.3.5 through 4.3.4

fahad azhar

hi guys do u plz explain me how to jailbreak iphone 4 ios ipsw 4.3.5
hurry…plzzzzzzzzzzzzzzzzzzz
Izzatistar

Rebooting failed. Its been hours.
Does it need to be the same computer we use to jailbreak when booting tethered?

http://www.iphoneism.com Lota Man

Not necessarily, no.

Izzatistar

What a mistake to update to 4.3.5. Can we downgrade back 4.3.3?

http://www.iphoneism.com Lota Man

Only if you have iOS 4.3.3 SHSH blobs saved

SuKii27

Stuck on reboot for hours? anyway to fix it
SuKii27

stuck at ‘waiting for reboot’
http://www.facebook.com/hazim.saleh Hazim Saleh

hello i have 3gs i download 4.3.4 every thing is working but last step Just boot tethered right now. its freeze at logo what i should do !?

http://www.iphoneism.com Lota Man

Are you following the steps correctly?

travis

worked perfect for me! thanks!

Tnas

hey man, for some reason I think I got a bad download of the 4.3.4IPSW it won’t even process! I even tried to do the same thing with 4.3.3 but no luck either. I’ve tried everything man! Any suggestions. My firmware it 4.10.01! FML

http://www.iphoneism.com Lota Man

That’s your baseband or modem firmware. Not the iOS version.

Sent from my iPad

Www Testingemail

did u try to install some app and tweak from Cyida and Installous?How about restarting suitation?Does it work well or not?

Tnas

unable to recognize specified IPSW! whats going on here brother?

Ktook

try the latest version of redsn0w_win_0.9.8b4

RvA

To be sure.

About the documentation

Step 7: …… Sit back and watch redsn0w jailbreak iOS 4.3.5 on your iP*…..

Is this a typo, shouldn’t it be iOS 4.3.4?

Boot iOS 4.3.5 tethered after jailbreak:
Step 1: …….
Step 2: Launch redsn0w once again and select the iOS 4.3.4 ipsw.

Is this a typo, shouldn’t it be iOS 4.3.5?

and..

Will I loose anything when I upgrade from 4.3.3 to 4.3.5?
Do I have to install all my Cydia store apps and data?
I use OKGBackup, should that be enough or…

akatzbreaker

no it shouldn’t because redsn0w doesn’t restore the device with the selected .ipsw but it identifies the exploit and starts exploiting the device with the exploit made for that firmware…
This means that if the hole of the previous firmware isn’t closed yet it is vulnerable with the same exploit.

It’s just for saving time (for the redsn0w programmers)….

http://www.iphoneism.com Lota Man

Exactly. Well put.

Stijn

Yes if you update your iPhone or iPod or iPad you have to jailbreak your iPod phone or pad again. I’ve got THE Same problem but if you have 4.3.3 you better dont update because with 4.3.5 you dont have a tethered jailbreak. It’s to late for me. But you can search on YouTube how to downgrade.
Adeelsgg

Hey Guys thankyou soOo much i have Jail broken my iPhone4 with iOS 4.3.5 with this technique and it worked fantastic. and for the friends who are complaining about the stuck and all please do it again and follow the procedure exactly i am 100% sure this will work..

http://www.iphoneism.com Lota Man

Thanks!

aj mack

based on the instructions, why do you still need to download 4.3.5?
aj mack

based on the instructions, why do you still need to download 4.3.5?
aj mack

the instructions were fine, worked perfect…just still wondering why it was necessary to download the 4.3.5
aj mack

the instructions were fine, worked perfect…just still wondering why it was necessary to download the 4.3.5
http://www.facebook.com/profile.php?id=1179914634 Shahbaz Shafique

its showing unable to recognise specified ipsw !!! HELPPPPPPPPPPPP

Trump

make sure you’re using 4.3.4 even though the firmware already on ur phone is 4.3.5
Ingpugalde

The problem is in how you saved the file.
1 - You must save as
2 - You must add the file name followed by the extension. Ipsw
3 - Ready, look for the firmware with redsn0w.

guest

Can anyone tell me why you need to download the 4.3.5 ipsw?.. As I was reading through the guide it doesnt say any steps that involve it.

bez

Yeah, that was a little confusing initially, until I realized the logic behind it… there should probably be an explicit mention of this for relative noobs like myself.

I didn’t use the DL from step one - just updated via iTunes to 4.3.5 (from 4.2.1), then followed the rest of the jailbreak. Worked well for me.

bez

Also noticed that more recent versions of redsnow (rc16, 18) won’t recognize the ipsws… make sure to use the one specified above (0.9.8b4).

Cbarela4

stuck on rebooting screen:/
Cbarela4

stuck on rebooting screen:/
ihackerdevice

ive got a problem, the ipsw ios 4.3.5 is seen as an winrar and not as an ios module pls help me??

http://www.iphoneism.com Lota Man

Extract the Winrar file and it will give you ipsw.

Sent from my iPad

Ingpugalde

The problem is in how you saved the file.
1 - You must save as
2 - You must add the file name followed by the extension. ipsw
3 - Ready, look for the firmware with redsn0w.

http://twitter.com/becksyyy Rebecca Anne✌

so do you need to download iOS 4.3.5?!

http://www.iphoneism.com Lota Man

Obviously.
Sent from my BlackBerry® Smartphone provided by Ufone

ihackerdevice

and were is my answere i thought u answered all needed help??? =(

http://www.iphoneism.com Lota Man

Answered!

Sent from my iPad

http://www.facebook.com/people/Leo-Hwang/581102733 Leo Hwang

i went through jailbreak according to the steps and yes i’ve installed the cydia
but i can’t open the cydia for some reason. and since the version is tethered at the moment if i turn off and turn it back on i should be needing to go through redsnow to start again right? but i can use my phone as if it’s not jailbroken… help

http://www.iphoneism.com Lota Man

To use Cydia, you must boot tethered using redsn0w. Follow the steps to boot tethered given in this guide.
Sent from my iPad

Mishy

thanks for sharing helped me a lot

http://www.iphoneism.com Lota Man

You’re very welcome

Sent from my iPad

eric

my ipod gets stuck on apple logo for 10 minutes, goes completely white. turns off then goes back to apple logo and repeats? what do i do?
Hurtadocarlos001

its showing unable to recognise specified ipsw !!! i used 4.3.4 firmware and it does recognize it, please help im stuck in step4
kalal

its showing unable to recognise specified ipsw !!! i used 4.3.4 firmware and it does recognize it, please help im stuck in step4

bez

Are you using redsn0w 0.9.8b4 ?? Newer versions of redsn0w (rc16, rc18) won’t recognize them, for some reason.

El Muchacho cabron

I did’t!!!!!!! in my Iphone 4 4.3.5 Thank’s work’s fine Best Regards from Mexico
Guest

So every time i install a new app though cydia i have to connect my phone to my computer again? everything works fine until i reboot to install an app and my phone gets stuck on the screen with the apple…

ktook@tk.com

Everytime you turn of your phone, you need to connect it again to the ocomputer

bez

Sure… but I think what he’s getting at is that Cydia/Installous apps don’t show up unless you restart (tethered obviously)… sort removes the whole reason for Installous in the first place, no?

Just_skual

Completed but, if tune off your device, iPhone can’t start up ;(

http://www.iphoneism.com Lota Man

That’s because you have to boot tethered.
Sent from my BlackBerry® Smartphone provided by Ufone

Lexsmama

Are you ever able to reboot untethered after it is jail broken? I just had to update my iOS and I had it jail broke for a year, now my ipad freezes in the apple screen. It was awesome until my apps quit working with the old iOS and old jailbreak.
Mackio Aziza

I have the same problem that “guest” said bellow:

“So every time i install a new app though cydia i have to connect my phone to my computer again? everything works fine until i reboot to install an app and my phone gets stuck on the screen with the apple…” How can we fix that??

http://www.iphoneism.com Lota Man

You’ll have to re-run the jailbreak once again.

Ktook

i’m stuck on installing activation bundles. Anyway to fix this?
Lordanubis

So far as I can see a part of the question of RVA is not yet answered.

To be sure.

About the documentation

Step 7: …… Sit back and watch redsn0w jailbreak iOS 4.3.5 on your iP*…..

Is this a typo, shouldn’t it be iOS 4.3.4?

Boot iOS 4.3.5 tethered after jailbreak:
Step 1: …….
Step 2: Launch redsn0w once again and select the iOS 4.3.4 ipsw.

Is this a typo, shouldn’t it be iOS 4.3.5?

http://www.iphoneism.com Lota Man

No. To jailbreak iOS 4.3.5, you have to point it to the iOS 4.3.4 ipsw.

Sitalkajee

I jailbroke my phone for the first time last week on 4.3.3 firmware and could not believe i had waited that long to do it - total iphone heaven……until i downloaded something dodgy and had to restore my phone. During the restore process, itunes upgraded my firmware to 4.3.5 - i was of course SCREWING! I then spent the rest of the night trying to downgrade it to 4.3.3 without any success. After a day of normal iphone, i decided a tethered jailbreak would be better than the restriction placed by apple so yesterday i followed your instructions and did a tethered jailbreak. It has worked perfectly fine AND somehow it lets me download cydia apps that require a reboot without having to connect it to redsnow - RESULT! Or have i done something wrong???

http://www.iphoneism.com Lota Man

To use Cydia again, you have to boot tethered.

Vathanaksambath

what is the problem if the pine apple screen is stuck..after reboot
http://twitter.com/tedyantara tedster

hi,
i’m newbie, pls help currently im on 4.3.0, if i wanted to jailbreak 4.3.5, should i run on it first, or just follow the steps after downloading both ipsw?? pls help

http://www.iphoneism.com Lota Man

Just follow the steps given here.
http://www.iphoneism.com Lota Man

Just follow the steps given here.

Hmwanare

my iphone4 has ios 4.3.5 and its tethered. but now i want to install multitask gestures. how to install it as when i connect it to redsnow i can tick either on multitasking guestures or reboot. not both. am using redsnow 0.9.8b3

http://www.iphoneism.com Lota Man

Just click on install multitasking gestures.

http://www.facebook.com/tural.mirzayev1 Tural Mirzayev

thanksssssssssss bro
Guest

jailbreak is done and cydia is also downloaded.Installus is also installed but it doesnot shows in home page. and when i open setting or apps it automatically crash. plz help!!!

http://www.iphoneism.com Lota Man

You might not have done the jailbreak correctly. Rerun the jailbreak and install Installous all over again.
guest

had the same problem tried it 4-5 times same thing happens everytime

The_Pharmacist

hello: I have an iPhone 4g and I install a iOS 4.3.5 and I download cydia,but the proplem is when I setup a theme or an apps from a cydia it will ask for restart the iPhone and when I restart my iPhone the apple logo was apper and it won’t to be turn off or turn on,and I asked my friend he tell me to boot my iPhone but I don’t know how I can boot my iPhone ,please can you tell me how I can boot my iPhone. Please, please…..

The_Pharmacist

and,when the final jailbreak for iOS 4.3.5 will appear in the Internet ?that will work without need for reboot the iPhone every time after we turn off the iPhone. I heard it will appear in the Internet next week isit right or not? please ….
The_Pharmacist

and,when the final jailbreak for iOS 4.3.5 will appear in the Internet ?that will work without need for reboot the iPhone every time after we turn off the iPhone. I heard it will appear in the Internet next week isit right or not? please ….
http://www.iphoneism.com Lota Man

Follow the steps mentioned in this guide to boot your iPhone tethered, as there is only a tethered jailbreak for iOS 4.3.5 at the moment.

amber

I upgraded to 4.3.5 and my cydia vanished from my main screan, how can i get it back up??

http://www.iphoneism.com Lota Man

Did you run the jailbreak?

amber

Well, no i dont know how bc someone else did it for me?

amber

So should i restore it??? Will it make it 4.3.3
amber

So should i restore it??? Will it make it 4.3.3

Monteiroca

I tried to install Installous 4, after I jailbreak my iPhone 4 (4.3.5), but it didn’t appear on the homescreen so I try to run jailbreak again but only choose tethered, and it works for me
Monteiroca

I tried to install Installous 4, after I jailbreak my iPhone 4 (4.3.5), but it didn’t appear on the homescreen so I try to run jailbreak again but only choose tethered, and it works for me
Confused

Ok, so if I bought an new iPad 2 4.3.5, is the only thing or best thing for me to do is wait until 5.0 comes out, upgrade and then jailbreak it then when the jailbreak comes out?

http://www.iphoneism.com Lota Man

IF a jailbreak for iPad 2 is released when iOS 5 goes live. As we know that the iPad 2 is not susceptible to the Limera1n bootrom exploit, either a userland jailbreak will be released on iOS 5 or someone will miraculously, finally dump the A5 iPad 2 bootrom.

http://www.iphoneism.com Lota Man

JailbreakMe won’t jailbreak iOS 4.3.5. It can only jalbreak up to iOS 4.3.3.
Mickycoyle

Why when i browse my firmware 4.3.5 redsnow says unable to recognize specifed IPSW pls help me

Thats what i keep getting?!

What to do?!

http://www.iphoneism.com Lota Man

Which version of redsn0w are you using?
http://www.iphoneism.com Lota Man

Which version of redsn0w are you using?

Guest

After i installed, I tried to install an app from cydia and the screen got stuck at apple logo when rebooting.

http://www.iphoneism.com Lota Man

rerun the jailbreak.
http://www.iphoneism.com Lota Man

rerun the jailbreak.
http://www.facebook.com/people/Connor-Hollingsworth/100002730980272 Connor Hollingsworth

i am the same any help

Lswis1

Will it change/upgrade the firmware?
iPhone 3GS old version.

http://www.iphoneism.com Lota Man

Yes it will.
http://www.iphoneism.com Lota Man

Yes it will.

Princeluckyz

With a tethered jailbreak, everytime i turn the SCREEN off, for about 30 seconds. it needs a reboot. As in, I’m listening to music, then i press the power button to turn the screen off. 30 seconds later, i need a reboot. How do i fix this?

http://www.iphoneism.com Lota Man

Looks like you have a buggy installation. You’ll need to reinstall the firmware on your iPod and then jailbreak it again.

lq

I’m stuck on step 7 - device restart. The ipod restarted but redsn0w exe is still on the waiting for restart page and wont start jailbreaking.
Help plz..

lq

I have tried 0.9.8 beta 3, 0.9.8 beta 4 and 0.9.8 beta 5.

Guest

I did a 4.3.5 jailbreak with redsn0w, then I installed an app, rebooted, and now I’m at the stage where my ipod is stuck on an apple logo. I would use redsn0w for a tethered reboot but I’m stuck on the logo, can’t shut down the ipod. What to do?

Personalhtml_1

wel twhat u gotta do is to put ur iphone into DFU mode then open redsnow select ur ipsw firmware uncheck the option install cydia only select the option just boot tethered right now then click next after that ur phone supposed to load the redsnow codes and it must turn on it happened to me many times when my phone got stucked in apple logo or when my battery drained till it shut off byitself
Jerizzy55

hold both buttons until it resets than continue holding until u get the “Connect to itunes” screen

Anonymous

Hey Lota when I do it and it says waiting for reboot on redsnow, my ipod (4th gen) get’s stuck on a blank white screen?

http://www.iphoneism.com Lota Man

do a clean firmware install and then rerun the jailbreak.

Godisadj5

my computer dont see this as a ipsw file its a rar file so how do i change it ??

Jerizzy55

download firmware 4.3.5 on another browser besides explorer, and get your ipod to the “Connect to itunes” screen when that happens instead of normally restoring threw itunes;shift click restore and select the 4.3.5 that u downloaded

Godisadj5

it wont open the rar file as a ipsw
Fake

I think the main problem everyone is having with a iphone 4 with 4.3.5 update loaded is that downloading the Download iOS 4.3.5 for iPhone, iPad and iPod touch in internet explorer fucks it right up. You will need to download it in fire fox internet explorer does not let you download it as a .ipsw file and it does not work. START again and downlod everything with fire fox and it’s simple as pie. took me forever to do.
matt

It has worked once for me.. Successful tethered jailbreak..
But after one day, it suddenly turned off.

When I plug it in to the computer, I can hear the usb device detected sound, but when i use redsnow, nothing appears.
Just yesterday, when I used redsnow, some commands showed on my iPod touch, together with the jailbreak loading screen. But today, there’s absolutely nothing, not even a white screen when it says reboot succeeded.

http://www.iphoneism.com Lota Man

Try doing a clean firmware restore on your device. Just connect it to the computer, launch iTunes and restore the firmware.

GersonP.

once i get cydia and i have to download anything for example winterboard, after all the codes come out it says reboot device , but then it gets stuck and nothing happens and i have to restore everything again . Please help.
Guest

so i have the same problem as others and so far no one seems to have addressed it and their questions are dodged…
JB’d just fine.
Installed a JB app thru Cydia and the install rebooted the device.
Now it is stuck on the apple logo screen.
*MAIN PROBLEM* :: Cant turn it off to tether and boot w/redsn0w.
anyone have the solution? how do i turn off my phone now?

i tried holding down the power button with the home button and it seems to turn off, but it reboots again. tried to time this and do it while launching redsn0w and the teethered boot option. the DFU mode steps started up and redsn0w proceeded…thought it worked, but after the progress bar fills up, redsn0w doesnt complete and the phone stays on the apple logo.

Ahmed Alq

it’s happen to me too WITH MY IPAD!!!!!
Jerizzy55

Deadass, i looked all over the place i think the only solution is to stay away from 4.3.5 and stick to either 4.3.4 or 4.3.3 like me. 4.3.5 is just dishing out problems for everyone when 5.0 is coming out soon

Bluskyline21

flawless. Thanks!
Osengard

I am a newbie, and followed all the instructions and it worked perfectly apart from when I plug in my Vodafone UK Sim it says Network Not Available. I have tried to reset Network which involves a reboot but still no luck…please help!
Tones_d_man

WHY DOWNLOAD THE IPSW FOR 4.3.5 IF U DONT USE IT??????????
WHY DOWNLOAD THE IPSW FOR 4.3.5 IF U DONT USE IT??????????
WHY DOWNLOAD THE IPSW FOR 4.3.5 IF U DONT USE IT??????????
WHY DOWNLOAD THE IPSW FOR 4.3.5 IF U DONT USE IT??????????

http://www.iphoneism.com Lota Man

To install on your device.
Sent from my BlackBerry® Smartphone provided by Ufone

Ffdsf

after jailbreak of 4.3.5 my simple mobile carrier changed to T-mobile and no internet connection i tried to enter the internet settings for simple mobile and t mobile and both didn’t work.. any help???
Mr 4Toes

why does redsnow freeze when exploiting Limera1n

http://www.iphoneism.com Lota Man

make sure you’re using latest version of redsn0w.

Ashleigh Ackers

redsn0w’d my 4.3.5 iPhone 4 with IPSW 4.3.4. Jailbreak went fine. After doing a tethered boot, I can get to the pineapple logo…which turns into an apple logo…which winds up back in recovery mode. Help?

http://www.iphoneism.com Lota Man

use latest version of redsn0w.

T.J. Yoo

4.3.5 Firmware jailbreaking concerns:

1) My iPad 1 was updated by accident when it was connected to iTunes (Beware although iTunes asks you to update your device’s iOS). This iPad wasn’t jailbroken before; it was my first jailbreak on this particular device but it was not my first time jailbreaking apple products.

2) DFU using the
a) traditional Redsn0w method where you turn the device off, on, hold both buttons together, and then release power/sleep button but remain holding the home button until Redsn0w responds,
b) download iReb-r4 and used DFU helper
c) download iFaith v.1.3.2 and used DFU Pwner

3) I tried using both Mac & Windows to perform a jailbreak on my iPad 1 using Redsn0w 0.9.8b4.

4) Download 4.3.4 & 4.3.5 firmwares using more than one site (i.e., redmondpie, iphone-dev, etc). The purpose was to validate that the issue wasn’t because of the firmware.

Followed through this “jailbreaking” process meticulously, which i have done it numerous times and have never had a single issue. And maybe it was because untethered. But since 4.3.5 iOS only supports and maybe the process is “tethered,” my device has not been working properly.

For example, Redsn0w installs without any issue. Once the 1st phase (initial install) finishes, you now have to restart your device manually. You hold down the slee/power button and slide off so that you can turn the device off, thus you will have to set your device to DFU mode in order for you to choose “Just boot tethered now” option. No other check mark should be on, only the boot tethered option. The 2nd phase finishes and instead of apple logo you will immediately see a pineapple logo. Wait around for a minute and you now have a tethered, jailbroken iPad.

Now, here is the biggest issue that I’m having. Let say I want to restart my device manually (holding down a power/sleep button), or an app that requires a reboot (in Cydia when you have to install a certain app such as iBossPref or adding sources such as iclarified), the device turns off and the screen stays in apple logo forever. Nothing happens. It won’t turn off and nothing happens. When you hold down power/sleep button and the home button together, unpleasant surprise of “device connect to iTunes” screen pops up or it simply doesn’t work. i then connect my device to iTunes and i have to start from the beginning all over again - by selecting “restore” option in iTunes, let iTunes update 4.3.5 all over again and go through the steps.

Am I missing something here? Is it because tethered and not untethered? Reboot equals death when it comes to tethered devices.

It’s quite interesting too because one time I restarted my iPad and had no problem coming back to the lock screen. i tried opening up Cydia and of course it didn’t work; it needed the device to be connected to a computer and needed to follow through a boot tethered now option. So put the device into DFU mode and Redsn0w gave me an error and it didn’t complete the “boot tethered.”

So, I have been wrestling an entire day over this. What is the best solution to fix this “restarting” issue with tethered jailbreak devices?

http://www.iphoneism.com Lota Man

When the device gets stuck at the Apple boot logo at restart, that is when you have to boot it tethered using redsn0w. Simply follow the procedure to boot tethered and your iPad 1 will function perfectly regardless of a tethered jailbreak.

EnMann10

Hello.
i just jailbreaked my iphone 3gs firmware 4,3,5 and i got a white cydia icon.when i press the icon cydia crashes -.- ive tried to do that tethered reboot thing in redsnow but it didnt work please help me

http://www.iphoneism.com Lota Man

You might have to rerun your jailbreak.
Natenator1

Just hit “boot tethered only”

Kevinjohnson

what do i do when redsn0w is stuck on waiting for reboot why wont it jailbreak my device?

Robertobado

I had the same problem until I downloaded the latest redsn0w version directly from dev team’s website

http://www.iphoneleaks.net/ iphoneleaks

Greater one that is man How you gathered this info man
CaLL Me hAmZaOh

how do this work im new to stuff like this
Jarvis_gadson

put the phone in DFU mode then run Redsnow
and check the box boot tethered it’ll pop right up
CZHiller

is there anyway to boot untethered? is really annoying, the only way i figured was restoring my ipod touch 4g to 4.3.3 and jailbreak it with old redsn0w, but guess what? itunes wont restore it to that version, im stuck with 4.3.5 jailbroken tethered… please help?

Jerizzy55

hey email me at jerizzy55@gmail.com, i recently had that problem and jailbroke back to 4.3.3

Hyunwoo Jo

Just download iOS 4.3.4 ipsw and jailbreak on your iOS 4.3.5 iDevice.
But you should click “tethered” every time you reboot your device.
HAPPY JAILBREAKING!!

Anna

Help please - this all started when I deleted a program in cydia and made my iPhone4 not be able to use cydia again. So decided to re-jailbreak my phone (which initially someone else did this for me).
Installed redsnow (and 4.3 Ipsw) before I did this I checked to see which platform version I was running (4.2) thought that 4.3,2 was close enough NOT because I am stuck in boot logo limbo.
Btw I did get it to work because the first time I downloaded a program from cydia worked to the point (before this my devise use to just respiring automatically) I realized after the fact that it could only reboot by now only computer tethering but to late by this time panicked did a full factory restore and NOW stuck in this boot logo and a non working iPhone !!!!!
Please h please help don’t know here to get help!

http://www.iphoneism.com Lota Man

Is your iPhone factory unlocked?
Sent from my BlackBerry® Smartphone provided by Ufone

Lexi

Thank you so freaking much! I have been constantly trying to jailbreak my phone for about… 3 straight days now & you are the ONLY one whose instructions were actually correct.
What a life saver.

http://www.iphoneism.com Lota Man

Sent from my BlackBerry® Smartphone provided by Ufone

Msja0625

my ipod was just jailedbreak, but unfortunately i updated my OS on itunes and all my jailedbreak apps gone. and now i’m back to my boring apps again..
Daillysteva

i am trying to do a tethered boot but everytime it needs me to enter DFU mode the ipod turns on instantly upon being plugged in and won’t stay off for me to do the steps to enter DFU mode. can anyone help?
Denu69

4.3.5 Firmware jailbreaking concerns:

1) My iPad 1 was updated by accident when it was connected to iTunes (Beware although iTunes asks you to update your device’s iOS). This iPad wasn’t jailbroken before; it was my first jailbreak on this particular device but it was not my first time jailbreaking apple products.

2) DFU using the
a) traditional Redsn0w method where you turn the device off, on, hold both buttons together, and then release power/sleep button but remain holding the home button until Redsn0w responds,
b) download iReb-r4 and used DFU helper
c) download iFaith v.1.3.2 and used DFU Pwner

3) I tried using both Mac & Windows to perform a jailbreak on my iPad 1 using Redsn0w 0.9.8b4.

4) Download 4.3.4 & 4.3.5 firmwares using more than one site (i.e., redmondpie, iphone-dev, etc). The purpose was to validate that the issue wasn’t because of the firmware.

Followed through this “jailbreaking” process meticulously, which i have done it numerous times and have never had a single issue. And maybe it was because untethered. But since 4.3.5 iOS only supports and maybe the process is “tethered,” my device has not been working properly.

For example, Redsn0w installs without any issue. Once the 1st phase (initial install) finishes, you now have to restart your device manually. You hold down the slee/power button and slide off so that you can turn the device off, thus you will have to set your device to DFU mode in order for you to choose “Just boot tethered now” option. No other check mark should be on, only the boot tethered option. The 2nd phase finishes and instead of apple logo you will immediately see a pineapple logo. Wait around for a minute and you now have a tethered, jailbroken iPad.

Now, here is the biggest issue that I’m having. Let say I want to restart my device manually (holding down a power/sleep button), or an app that requires a reboot (in Cydia when you have to install a certain app such as iBossPref or adding sources such as iclarified), the device turns off and the screen stays in apple logo forever. Nothing happens. It won’t turn off and nothing happens. When you hold down power/sleep button and the home button together, unpleasant surprise of “device connect to iTunes” screen pops up or it simply doesn’t work. i then connect my device to iTunes and i have to start from the beginning all over again - by selecting “restore” option in iTunes, let iTunes update 4.3.5 all over again and go through the steps.

Am I missing something here? Is it because tethered and not untethered? Reboot equals death when it comes to tethered devices.

It’s quite interesting too because one time I restarted my iPad and had no problem coming back to the lock screen. i tried opening up Cydia and of course it didn’t work; it needed the device to be connected to a computer and needed to follow through a boot tethered now option. So put the device into DFU mode and Redsn0w gave me an error and it didn’t complete the “boot tethered.”

So, I have been wrestling an entire day over this. What is the best solution to fix this “restarting” issue with tethered jailbreak devices?
http://www.facebook.com/jlucini Jasmine Lucini

i jailbreaked my iphone4 with 4.3.5 and when i turn my phone off its ok but when i restart it i get stuck on the apple logo then i just tether it each time but its annoying what can i do to stop this ..helppppppppppppppppppppppppp.i used redsnow 0.9.8b7 and its getting really annoying. anyone know how to fix it .

Desmond

Hi Jasmine, I encounter same problem like you, do you find any solution? My phone is hang at apple icon now…help!!

Xxoodeexx

okay i dont know if anyone pays attention to the comment list but i did this and it was all working fine. i could even respring without rebooting when i just changed my themes. but when it did need a reboot, i wasnt by a computer so i couldnt do it. my ipod is dead and i cant tell if its accepting a charge, so i cant do it. or it might just be that i dont have the 4.3.5 downloaded, because i didnt think that was necisary because i was already running it. btw im doing this on two separte computers
Abood-923

BBC egg
NintendogsQueen

my ipod gets stuck on the white screen (waiting to reboot)
what do i do. its been days and i don’t want to restore my ipod
Ada

I’m having a problem, I jailbroke my 4.3.5 with 4.3.3 ipws. and I’ve had it hacked for like 2 weeks and I decided to uninstall a tweak from Cydia and I guess it wanted to respring but it got stuck there so I tried to put it in DFU mode so I can “turn it on” again, though it basically wasn’t turned off. But now after I do the steps it gets stuck in the pineapple and nothing happens. Is there a way to get passed the pineapple or do I have to restore :/?
Shebi55

tnx

http://www.iphoneism.com Lota Man

You’re welcome.
Sent from my BlackBerry® Smartphone provided by Ufone

iOS 4.3.5 Tethered iPhone, iPad, iPod touch Jailbreak / Boot Using Redsn0w [Tutorial]

Recent Posts